How to use the editor
- Add points, lines and areas with + Point, + Line and + Area, or Import list to paste many at once (from an AI assistant, a spreadsheet or a CSV).
- Give each point a location: type an address or a coordinate in the Location field and press Enter, click Place on map and then on the map, or drag the pin.
- Draw lines and areas by clicking their points on the map (see below).
- Check the spot with the satellite layer or the links under Verify & tools, and drag it to the right place if needed.
- Export image (green button) and download the PNG.
Lines and areas
A line is a route, cable or pipe route, road section, trail or fence; an area is a site, plot, zone or park. A new line or area starts in drawing mode: click its points on the map in order, and double-click, press Esc or click Finish when it is complete (a line needs 2 points, an area 3). Afterwards the selected line or area shows white handles: drag one to move a point, click the small handle between two points to add one, right-click a handle to remove it.
Instead of drawing, you can type the points in the field: coordinates or addresses separated by ; (for example 52.0907, 5.1214; 52.0950, 5.1300 or Stationsplein 1, Utrecht; Domplein, Utrecht), or WKT such as LINESTRING(5.1214 52.0907, 5.13 52.095). Each point takes any format from the table above.
An area can also be a rectangle, a square or a circle: choose it under Shape. As long as it has no place yet, click one corner on the map and then the opposite corner (for a circle: the centre, then the edge); Esc starts again. Or type the centre in the field (an address or coordinates, also Rijksdriehoek) and the size in metres. On the map, drag the shape itself to move it and a corner (or the edge of the circle) to resize it. A rectangle or square can be rotated: drag the orange handle above it (hold Shift for steps of 15°) or type the angle under Rotation, in degrees clockwise.
Line or Border sets the thickness of a line or of the edge of an area: thin, normal or thick, on the map and in the export.
A line can have a direction: start → end, end → start or both ways. Arrows are drawn along the line on the map and in the export. Lines and areas get the colour of their category, just like pins.
Labels
Every item shows its name on the map and in the export. Untick Label to hide the name of one item (the Labels switch in the export hides all of them). Drag a name on the map to move it, for example away from a busy spot: the export puts it in the same place. Reset label position puts it back in its automatic place.
Location formats that are recognised
| Type | Example |
| Address | 221B Baker Street, London or Eiffel Tower, Paris |
| Decimal degrees (lat, lon) | 48.8584, 2.2945 – lon/lat order is corrected when it is unambiguous |
| Degrees-minutes-seconds | 48°51'30.1"N 2°17'40.2"E |
| Labelled | lat 48.8584 lon 2.2945, POINT(2.2945 48.8584) |
| Map links | Google Maps, Apple Maps, Bing Maps, OpenStreetMap, geo: URIs (short links like maps.app.goo.gl do not work: open them and copy the full URL) |
| EPSG code + x y | EPSG:28992 121000 487000 (Dutch RD), EPSG:25831 500000 5700000 (UTM), also SRID=28992;POINT(121000 487000) and urn:ogc:def:crs:EPSG::28992. Built in: 4326, 4258, 3857, 28992, UTM zones (326xx, 327xx, 258xx), 31370, 3812, 27700, 2154, 2056, 3035, 3006, 3067. x (easting) comes first; a swapped order is corrected when only one order fits the area of the system. |
| Dutch Rijksdriehoek (RD New) without code | 155000 463000 or X=107005 Y=426352 – X first; the order is corrected when it is swapped. Choose Rijksdriehoek under Coordinates to have positions written in RD too. |
An address is only a centre point. It may be metres or tens of metres away from the real object. An AI's coordinate may be completely wrong. Always compare with the satellite layer or Street View and drag the pin to the right spot.
Coordinate system
Choose the system you work in under Coordinates, next to the project name: for example Rijksdriehoek (RD New) in the Netherlands, Lambert 72 in Belgium or a UTM zone. The list holds the systems that are valid in the area of the map, with their common name and EPSG code. In that system:
- two plain numbers you type in a location field are read as X and Y (other formats, such as lat/lon or a number with an EPSG code, keep working);
- a point, corner or centre you drag or draw on the map is written in it;
- Verify & tools shows the position in it, next to lat/lon.
- when you switch to another system, the coordinates in the location fields of all your maps are rewritten in it (addresses and map links stay as they are). Switching back gives exactly what was there before: 136500 stays 136500.
What you type always stays as you typed it. With GPS (lat, lon) chosen, a position you typed in another system, such as RD, stays in that system when you drag it. The choice is kept in this browser.
URL parameters
Add parameters to the address to choose where the map starts: lat and lon (decimal degrees), zoom (1-21) and crs (an EPSG code, e.g. 28992). crs sets the coordinate system of the editor (see above), and it stays chosen in this browser. A map without points starts in the area of that system (Rijksdriehoek: the middle of the Netherlands). Without lat/lon or crs, an empty map starts in the region of your computer's time zone (for example the Netherlands for Europe/Amsterdam); no location permission is asked and nothing is sent. Example: app.html?lat=51.9225&lon=4.4792&zoom=12&crs=28992 (Rotterdam, Dutch RD). Categories: repeat cat=Name:colour, e.g. &cat=Restaurants:e11d48&cat=Hotels:blue (colour is hex with or without #, or a CSS colour name, and optional). A map without points gets exactly these categories; otherwise categories with the same name get the colour and new ones are added.
Categories
Categories give pins their colour and build the legend. Rename them, change the colour, or add new ones in the legend at the bottom left of the map. Importing a list creates categories automatically.
Saving
Everything is kept in this browser automatically. You can keep several projects: they are listed on the home page under Your maps, where you can start a new one, delete one or load one from an exported map project. The last project you worked on opens automatically. Export map project (next to the project name) writes a .mapexport file (JSON inside) for a backup or to use on another computer. Nothing is uploaded.
Feedback
Questions, ideas or something wrong? Mail us at .
Export
The image has the shape of the map as you see it, or of a crop you draw on it; you only choose the resolution (pixels along the long side, 800 to 4000). Area: let the map fit all points, use exactly the view you framed, or Choose on the map…, which puts a frame on the map that you move and resize freely in width and height (the crop is kept with the project). Pick a style, add a title, and download. The legend lists the categories in use. Map attribution is added automatically.
License
The free version adds a small credit line to the image. A license (button Free version in the top bar) removes that line. Paste the code you received, or open the link from the mail.